LiPo Battery 1000mAh 3.7V with JST
—A 1000mAh 3.7V lithium polymer battery with a JST connector, the standard battery for small ESP32 and sensor projects.
Specifications
- 3.7V nominal, 1000mAh capacity
- JST-PH 2.0 connector
- Built-in protection circuit
- Flat pouch cell, roughly 34 x 52 x 6mm
- Rechargeable via a TP4056-class charger
What you can build with the LiPo Battery 1000mAh 3.7V with JST
- Battery-powered ESP32 sensor nodes
- Portable and handheld builds
- LoRa and Meshtastic nodes
- Wearables and small enclosed projects
Compatibility
Fits boards with a JST-PH battery connector, including many ESP32 and LoRa boards that charge the cell themselves. Lithium pouch cells must not be punctured, crushed or charged below 0°C.
Shipping
Dispatched from New Zealand with courier delivery nationwide, including rural addresses. Prices are in New Zealand dollars.
Availability: Sold out
A 1000mAh 3.7V lithium polymer battery with a JST connector, the standard battery for small ESP32 and sensor projects.
Specifications
- 3.7V nominal, 1000mAh capacity
- JST-PH 2.0 connector
- Built-in protection circuit
- Flat pouch cell, roughly 34 x 52 x 6mm
- Rechargeable via a TP4056-class charger
What you can build with the LiPo Battery 1000mAh 3.7V with JST
- Battery-powered ESP32 sensor nodes
- Portable and handheld builds
- LoRa and Meshtastic nodes
- Wearables and small enclosed projects
Compatibility
Fits boards with a JST-PH battery connector, including many ESP32 and LoRa boards that charge the cell themselves. Lithium pouch cells must not be punctured, crushed or charged below 0°C.
Shipping
Dispatched from New Zealand with courier delivery nationwide, including rural addresses. Prices are in New Zealand dollars.